Product Feature
1. Physical peeling process, high purity graphene.
2. Less dosage of conductive additive and binder, higher energy density for LIB cell.
3. Cathode paste with stable viscosity and easy for coating.
4. Electrode plate is easy for calendaring which can decrease the calendaring pressure while increase roller speed, but very little rebound.
5. Greatly improve LIB cell rate charge & discharge performance and cycle life.
![SC Pas 1002 SC Pas 1002]()
Permeation curves_ different conductive agents | ![SC Pas 1002 SC Pas 1002]()
SEM _Pas1002 paste dry film |
applied in NCM material
Due to the differences from basic materials, even for NMC materials from different supplier, the permeation curves are not identical. SuperC can collaborate with clients to provide lab support and integrated solution upon client’s material and requests on quality and cost etc.
Application Case
Client request:
LFP cathode system, currently with 2% CNT, energy density and 60℃ cycle life performance is desired to be improved.
Test Plan & Result:
SuperC recommends 1.0%FLG(Pas1002), the 60℃ cycle is improved apparently.
![SC Pas 1002 SC Pas 1002]()
Test Conditions:Pas1002-151203-14:40,*CA+3%hsv900+P2,AD=10mg/cm2, PD=2.0g/cc,Ch_1C/Dish_5C@60±3℃
60℃ cycle life test_ FLG as LFP conductive additive
Technical Parameters
Appearance | Graphene% | Solid% | Solvent | Fe Content |
Ash Black sticky paste | 4.0±0.2% | 5.0±0.2% | NMP | < 10ppm |
Recommendation
Recommended for use in LFP cathode system with 0.5%-1.5% addition.
Package
Normally 20 kg or 1000 kg packaged, or customized.